How do you upgrade GPU? you can easily upgrade your device by following this easy tips.
The video card is an essential part of the computer, so the selection and installation also need to be careful to ensure the image quality for your computer.
Here I will guide you on how to choose and upgrade the GPU.
Choose GPU
Before buying and upgrading, you should make sure the graphics card is compatible with your computer. Before you get started, consider the following.
- GPU space on a computer
- A PC slot
- Supply of electricity
- A power outlet
1. GPU space on a computer
Does the new GPU fit in your computer’s available space? Measure the open space on your computer and compare it to the desired graphics card’s size.
2. A PC slot
Most computers with installed graphics cards have this PCI-e x16 slot, but it’s important to check by opening your computer.
3. Supply of electricity
The minimum recommended power supply capacity is listed on every graphics card.
You must carefully check the power consumption of each video card to match your computer because video cards use a lot of power. The computer won’t be able to function steadily if there isn’t enough power.
4. A power outlet
Current graphics cards use one or more of the PCI-e power connectors listed in the card’s specifications. Ensure that your computer has the required power connectors.
Remove the computer case and upgrade the GPU.
Once you’ve chosen a great GPU to upgrade your PC, I’ll show you how to disassemble and boost your PC’s GPU.
Remove the computer case.
- Uninstall old drivers
- Unplug the computer
- Remove the case
- Define expansion slot
- Self-grounding
- Remove the old graphics card if necessary
1. Uninstall old drivers
Select the Search icon > Type Device Manager > Select the Device Manager app.
Select Display adapters > Right-click your Video Card, as shown in the picture: Intel (R) UHD Graphics 620 > Select Disable device.
2. Unplug the computer
You must turn off the power to ensure safety when removing the video card.
3. Remove the case
Tilt the case and locate the motherboard part to open the machine.
Remove the securing screw on the side of the computer.
Most modern cases use spiral screws, but you may still need a screwdriver to turn the screw if it’s too tight.
For simple disassembly, the machine should be put on a flat surface.
I need to wait a while for the computer to cool down to avoid burns.
4. Define expansion slot
Modern graphics cards are usually connected via a PCIe slot near the processor.
If you don’t see the graphics card, you need to check on the motherboard; maybe the graphics card is installed here.
Check your motherboard or your machine’s documentation if the PCIe slot is still not identified.
5. Self-grounding
This prevents electrostatic discharge from damaging electronic devices.
You can connect the electrostatic bracelet to the metal case of your computer or release the static electricity by touching any metal object.
You should wear shoes and sandals with rubber soles.
6. Remove the old graphics card if necessary
Remove the securing screw and remove the tab at the bottom of the card, just behind the slot.
The direction to pull the graphics card is to pull the card straight out to avoid damaging the slot.
Be sure to disconnect all display ports before removing the graphics card; the computer is not connected to a power source.
Upgrade the GPU
After finishing the preceding steps, you will reach the disassembly step to upgrade the GPU.
- Dust removal
- Replace your video card
- Keep your graphics card safe.
- Connect the power source.
- Snap the computer case shut.
- Connect the monitor.
- Replace the drivers
- Check
1. Dust removal
Cleaning dust will make your computer easier.
Using an air suction tool or a small vacuum cleaner is recommended to clean the dust inside.
2. Replace your video card
Remove the new card from the antistatic bag and carefully insert it into the slot.
You should avoid touching the contacts before the card bottoms out.
You must remove the metal layer covering the frame connected to the PCI-E slot if your computer is not equipped with a video card.
Insert the new card directly into the PCIe slot and press gently. The moment the card is inserted, you will hear a click. Remember to screw the screw into the outer frame after inserting the card.
You may remove the board behind the case if the new card requires two frames.
Make sure there are no cables or devices connected when inserting the card. You should remove all lines and then reinsert them after inserting the card.
3. Keep your graphics card safe.
Once mounted, use screws to secure the chard to the frame.
Be sure to install the correct number of screws provided by the manufacturer in the video card.
4. Connect the power source.
Most cards have an incoming or outgoing power connector. It would help if you connected them via the PCI-E port.
Some cards that use Molex to PCI-E converters do not have a power connection.
5. Snap the computer case shut.
After finishing, close the computer case and reattach all the screws in the case to ensure safety when using.
Reattach previously removed devices to make space for the graphics card.
6. Connect the monitor.
Connect the monitor to the displayPort on the card to get the most out of the graphics card.
Use HDMI or DisplayPort (if available) for the best quality.
The graphics card will use a VGA-to-DVI converter if the monitor doesn’t have a DVI cable.
7. Replace the drivers
Re-plug all the cables you removed at the start and restarted the machine.
The operating system will automatically detect the graphics card and reconfigure the computer for you.
If you want to get the most out of your video card’s performance, you should install the driver, but this will be much more troublesome.
8. Check
After completing all the steps, you should try a high-resolution video, high-graphics game, or video editing software to test the “genuine” of the graphics card you just upgraded.
Final Thoughts
Above is how to learn and upgrade your PC’s GPU. Guide you to choose to remove and install a new GPU for your PC quickly. I hope the above method will be helpful for you in upgrading your GPU.
Related article:
Why Do My GPU Fans Run for a Few Seconds Then Stop? (what should I do? Explained)